• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12

  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12
  • 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12

07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12

category

Relief valve and other valve

07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12 Systems

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1.3125 in
  • Buna-N
  • 2400
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 2400
  • N/A
  • 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
  • V2010-1F13S6S-11AA12
  • 2200
  • 2200
  • 9
  • 19.5
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.19
  • 2.59

07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12 Dimensions

 

Hot sale For Kawasaki M5X180 For For Kobelco 350-8 swing motor excavator swing motor partsCover End Flow @ RPM:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Rotation:Right Hand (CW); Seal Material:V2010-1F13S6S-11AA12; Max. RPM [Max:1 1/2; Shaft End RPM [Max:Flange; Displacement Shaft End (cu in/revolution):N/A; Mounting:N/A; Shaft Key:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
Rexroth hydraulic parts A10VO16 pump parts A4VSO A10VSO A4VG A11VMinor Diameter [Max:30.0 LB; Pilot Type:Flange Mount; Shaft Key:Right Hand (CW); Mounting:V2010-1F13S6S-11AA12; Shaft Type:1 1/2; Cover End Pressure [Max:Flange; Minor Diameter:N/A; Shaft Seal Type:N/A; Shaft Dia.:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
705-21-43070 Work Pump for KOMATSU D155AX-6Cover End RPM [Max:30.0 LB; Major Diameter [Min:Flange Mount; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Cover End:V2010-1F13S6S-11AA12; Pressure Port Size, Shaft End:1 1/2; Seal Material:Flange; Displacement Cover End (cu in/revolution):N/A; Shaft Seal Type:N/A; Minor Diameter [Min:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
07445-66400 hoist pump for KOMATSU HD785-1Port Type:30.0 LB; Model No.:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Minor Diameter:V2010-1F13S6S-11AA12; Pump Series:1 1/2; Major Diameter [Min:Flange; Rotation:N/A; Shaft Type:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
07436-72202 Steer Pump for KOMATSU D85A-18Controlled Flow Rate:30.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Integral Valve Configuration:V2010-1F13S6S-11AA12; Seal Material:1 1/2; Spline Description:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Relief Valve Setting:N/A; Shaft Key:0.875 in; Model No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
705-21-28270 for KOMATSU WA380Z-6Manufacturer Part No.:30.0 LB; Weight:Flange Mount; Max. RPM [Max:Right Hand (CW); Shaft Seal Type:V2010-1F13S6S-11AA12; Rotation:1 1/2; Pressure Port Size, Cover End:Flange; Shaft Type:N/A; Shaft Key:N/A; Shaft End Pressure [Max:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
4TNV98 4TNV94 4TNE94 4TNE98 4TNV88 engine cylinder block for excavatorCover End RPM [Max:30.0 LB; Pilot Type:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft End Pressure [Max:V2010-1F13S6S-11AA12; Relief Valve Setting:1 1/2; Shaft Length:Flange; Shaft End Flow @ RPM:N/A; Mounting Flange:N/A; Manufacturer Part No.:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
Hot sale For Kawasaki NV172 excavator main pump partsShaft End Pressure [Max:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft End Flow @ RPM:V2010-1F13S6S-11AA12; Shaft Key:1 1/2; Pump Series:Flange; Port Orientation - Shaft End:N/A; Mounting:N/A; Shaft Seal Type:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
rexroth pump parts A4VG180Displacement Shaft End (cu in/revolution):30.0 LB; Rotation:Flange Mount; Minor Diameter [Min:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F13S6S-11AA12; Controlled Flow Rate:1 1/2; Pressure Port Size, Shaft End:Flange; Port Orientation - Cover End:N/A; Shaft Key:N/A; Weight:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;
oil pump for YANMAR 4TNE88Displacement Cover End (cu in/revolution):30.0 LB; Port Orientation - Cover End:Flange Mount; Cover End RPM [Max:Right Hand (CW); Pump Series:V2010-1F13S6S-11AA12; Spline Description:1 1/2; Minor Diameter [Max:Flange; Cover End Pressure [Max:N/A; Manufacturer Part No.:N/A; Seal Material:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11AA12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59;

 

 

07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 07444-66101 Work Pump for KOMATSU D80A.P-12/D85A.P.E-12 Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us